| Why Orcaboard?
Orcaboard™Recycled Plastic Lumber is a solid profile
material with colorants and UV inhibitors throughout. Made
using High Density Polyethylene (HDPE) from recycled milk
jugs, Orcaboard™ is extremely durable, tougher than
wood, non-toxic and maintenance free. Orcaboard™ is
unaffected by saltwater, rot and insects, will not fade,
check, split, or splinter, is easy to work with using standard
tools and fasteners and comes with a 50 year limited warranty.
Permanent UV stabilized colors eliminates the need for painting,
staining, waterproofing, stripping and resurfacing. Orcaboard™ is
also resistant to paint, ink, mildew, and other contaminants
which may be removed using mild cleaners.
|
|
|
|
| Weathered Wood |
White |
Cedar |
Hunter Green |
Plastic Bench Leg Components
Durable
Plastic Design plastic bench legs are colored in Black with
the exception of the Bench into Table legs which are colored
in White. The Black legs are a Flow Molded, solid profile
Recycled High Density Polyethylene (HDPE) with colorant and
UV inhibitors throughout and a limited warranty of 15 years.
Metal Structural Components
All metal structural components are drilled
and formed for quick assembly. All steel conforms to ASTM
A36 hot rolled steel. Following fabrication, all metal components
are cleaned and treated with a five stage iron phosphate
process prior to the coating application. This process includes
a non-chromated alkaline cleaner and an iron phosphate treatment
followed with an acidic sealer for maximum adhesion. The
protective powder coatings are either polyester or TGIC powder
applied by the dry electrostatic process to 3 to 4 mils thick
on all surfaces. Following application, the parts are baked
at 350 to 400 degrees F. and maintained at temperature until
properly cured. Hot dip galvanized 3 to 4 mils thick to a
standard ASTM A123 is an alternate to powder coating.
Any questions? Please contact us: 425-883-2570 or Click
Here For Online Requests >>
|
|
Contact Us: (425) 883-2570
