Orcaboard™ Recycled Plastic Lumber is a solid profile material with colorants and UV inhibitors throughout. Made using High Density Polyethylene (HDPE) from recycled milk jugs, Orcaboard™ is extremely durable, tougher than wood, non-toxic and maintenance free. Orcaboard™ is unaffected by saltwater, rot and insects, will not fade, check, split, or splinter, is easy to work with using standard tools and fasteners and comes with a 50 year limited warranty. Permanent UV stabilized colors eliminates the need for painting, staining, waterproofing, stripping and resurfacing. Orcaboard™ is also resistant to paint, ink, mildew, and other contaminants which may be removed using mild cleaners.

Weathered Wood	Driftwood Gray	White	Cedar	Hunter Green

Plastic Bench Leg Components
Durable Plastic Design plastic bench legs are colored in Black with the exception of the Bench into Table legs which are colored in White. The Black legs are a Flow Molded, solid profile Recycled High Density Polyethylene (HDPE) with colorant and UV inhibitors throughout and a limited warranty of 15 years.

Metal Structural Components
All metal structural components are drilled and formed for quick assembly. All steel conforms to ASTM A36 hot rolled steel. Following fabrication, all metal components are cleaned and treated with a five stage iron phosphate process prior to the coating application. This process includes a non-chromated alkaline cleaner and an iron phosphate treatment followed with an acidic sealer for maximum adhesion. The protective powder coatings are either polyester or TGIC powder applied by the dry electrostatic process to 3 to 4 mils thick on all surfaces. Following application, the parts are baked at 350 to 400 degrees F. and maintained at temperature until properly cured. Hot dip galvanized 3 to 4 mils thick to a standard ASTM A123 is an alternate to powder coating.

Any questions? Please contact us: 425-883-2570 or Click Here For Online Requests >>